Thứ Tư, 28 tháng 1, 2015

Hi-Strength 90 Spray Adhesive

Keo 3M - Hi-Strength 90, Keo xịt 3M dính cao
  • Lực dính cao
  • Chịu nhiệt
  • Kỹ thuật xịt úp ngược….
  • Lĩnh vực ứng dụng: Nội thất, công nghiệp gỗ, hàng hải, âm thanh,…
  • Màu: Trong
  • Trọng lượng: 17.6 oz

Keo dán dạng phun, dán được nhiều loại vật liệu: tấm mỏng trang trí, ván ép, gỗ, kim loại, xốp, bê tông, các loại nhựa (kể cả PE,PP)…
Hi-strength 90 dễ sử dụng, nhanh khô, độ dính cao, chịu nhiệt tốt giúp mối hàn bền vững duới tác động của môi trường.
Hi-strength 90 có 3 cấp độ phun giúp cho việc phủ keo dễ dàng, chính xác đồng thời có độ phủ cao giúp tiết kiệm chi phí.
  • 3M HI-STRENGTH 90:Rất mạnh, khô nhanh, liên kết tốt.
  • 3M Hi-Strength 90 Spray Adhesive rất lý tưởng cho việc liên kết những dát mỏng trang trí.
  • Keo dán dạng phun, dán được nhiều loại vật liệu: tấm mỏng trang trí, ván ép, gỗ, kim loại, xốp, bê tông, các loại nhựa (kể cả PE,PP)…
  • Hi-strength 90 dễ sử dụng, nhanh khô, độ dính cao, chịu nhiệt tốt giúp mối hàn bền vững duới tác động của môi trường.
  • Hi-strength 90 có 3 cấp độ phun giúp cho việc phủ keo dễ dàng, chính xác đồng thời có độ phủ cao giúp tiết kiệm chi phí.
Tài liệu:
http://multimedia.3m.com/mws/mediawebserver?mwsId=66666UuZjcFSLXTtlxTcOXTyEVuQEcuZgVs6EVs6E666666--&fn=HiStrength90_7870372.pdf
Hey guys this is Frank from rcFoamFighters I have decided to start a build thread for the SkyFighter v2. This thread is more for all of you who decide to build this plane. I will post all the basic stuff needed to do the build and then leave it open to anyone who wants to discuss and share their build experiences. Please feel free to post any pictures, video or questions related to this build. I will add more to this thread as time permits. For now please check out the videos, links and pictures listed below.
Quick build and first test flights:
rcFoamFighters Sky Fighter ver2 (Fast RC Plane) (9 min 6 sec)
 
Plane Dialed in and First Radar Speed Clocks (94mph) with 2212/6 suppo brushless motor, 
30amp Suppo brushless ESC, APC 6" x 4" Prop and Rhino 1350 30c 3s1p LiPo Battery
SkyFighter v2 Test Flights & 94MPH Radar Speed Clocks (7 min 21 sec)
 
Versatility Testing with 2 cell setup and slow flyer prop more Radar Speed Clocks with 3 cell setup and APC 5.5" x 5.5" prop 
Includes High Speed Crash and Damage assessment.
SkyFighter v2 Versatility testing and Crash (8 min 44 sec)
 
rcFoamFighters FREE TEMPLATES & PLANS DOWNLOAD Link:
Below are pictures of the SkyFighter v2 I built without any PDF templates or plans. Dimensions
were taken from this plane and given to my brother Paul to draw them up in AutoCAD and then convert them into a tiled PDF template.
Attached Thumbnails
  • Name: DSCF2359.jpg Views: 518 Size: 73.2 KB Description: Cut out the center fuselage-wing piece after drawing it onto the EPP foam. All the EPP Parts to this plane can be cut from (1) sheet of 24" X 36" x 15mm EPP Cut out the center fuselage-wing piece after drawing it onto the EPP foam. All the EPP Parts to this plane can be cut from (1) sheet of 24" X 36" x 15mm EPP 73.2 KB · Views: 518
  • Name: DSCF2362.jpg Views: 357 Size: 59.7 KB Description: Center fuselage-wing piece completely cut out. Center fuselage-wing piece completely cut out. 59.7 KB · Views: 357
  • Name: DSCF2363.jpg Views: 380 Size: 58.8 KB Description: Lines are for the wing bevels and placement of the upper and lower fuselage pieces also seen is the centerline used to make sure all measurements are squared and true. Lines are for the wing bevels and placement of the upper and lower fuselage pieces also seen is the centerline used to make sure all measurements are squared and true. 58.8 KB · Views: 380
  • Name: DSCF2369.jpg Views: 322 Size: 65.1 KB Description: Cut two 3' wide strips of 15mm EPP to make the upper and lower fuselage pieces. Cut two 3' wide strips of 15mm EPP to make the upper and lower fuselage pieces. 65.1 KB · Views: 322
  • Name: DSCF2371.jpg Views: 340 Size: 61.3 KB Description: All of the EPP pieces cut out. upper and lower fuselage pieces along with the center fuselage-wing piece. All of the EPP pieces cut out. upper and lower fuselage pieces along with the center fuselage-wing piece. 61.3 KB · Views: 340
  • Name: DSCF2372.jpg Views: 402 Size: 75.7 KB Description: Trial fit upper and lower fuselage pieces to the center fuselage-wing piece. Trial fit upper and lower fuselage pieces to the center fuselage-wing piece. 75.7 KB · Views: 402
  • Name: DSCF2374.jpg Views: 416 Size: 53.3 KB Description: Bevel all wing edges completely with hand held hotwire then shape with sanding blocks. Glue 18" wood spar in to bottom of wing. Carbon fiber or wood will work. Bevel all wing edges completely with hand held hotwire then shape with sanding blocks. Glue 18" wood spar in to bottom of wing. Carbon fiber or wood will work. 53.3 KB · Views: 416
  • Name: DSCF2378.jpg Views: 429 Size: 61.2 KB Description: Glue plastic inline motor mount into the top side of center fuselage wing piece. Any stick mount will work but motor shaft should be centered on wing for best performance. Trial fit before gluing Glue plastic inline motor mount into the top side of center fuselage wing piece. Any stick mount will work but motor shaft should be centered on wing for best performance. Trial fit before gluing 61.2 KB · Views: 429
  • Name: DSCF2384.jpg Views: 493 Size: 86.0 KB Description: Tack down the first layer of henrys style fiberglass weave with hot glue gun. Only tack enough to hold in place. Tack down the first layer of henrys style fiberglass weave with hot glue gun. Only tack enough to hold in place. 86.0 KB · Views: 493
  • Name: DSCF2385.jpg Views: 393 Size: 79.4 KB Description: When Top side of center fuselage-wing completely tacked on trim weave with scissors to about 1/2" short of edges. When Top side of center fuselage-wing completely tacked on trim weave with scissors to about 1/2" short of edges. 79.4 KB · Views: 393
  • Name: DSCF2387.jpg Views: 409 Size: 74.3 KB Description: Tack on first layer of weave to the bottom side of the center fuselage-wing the same way the top side was done. Tack on first layer of weave to the bottom side of the center fuselage-wing the same way the top side was done. 74.3 KB · Views: 409
  • Name: DSCF2390.jpg Views: 395 Size: 96.1 KB Description: When ready to spray with 3M 90 high strength adhesive be sure to work on flat surface so wing will stay flat. When ready to spray with 3M 90 high strength adhesive be sure to work on flat surface so wing will stay flat. 96.1 KB · Views: 395
  • Name: DSCF2392.jpg Views: 399 Size: 97.7 KB Description: Spray top side of center fuselage-wing piece with adhesive and quickly spread with puddy knife. do small sections at a time or glue may dry to fast and clump up on the surface. Spray top side of center fuselage-wing piece with adhesive and quickly spread with puddy knife. do small sections at a time or glue may dry to fast and clump up on the surface. 97.7 KB · Views: 399
  • Name: DSCF2393.jpg Views: 365 Size: 101.3 KB Description: When the top side is dry and not tacky flip over and repeat proccess on the bottom side of the center fuselage-wing piece. Spraying with adhesive and spreading with puddy knife. When the top side is dry and not tacky flip over and repeat proccess on the bottom side of the center fuselage-wing piece. Spraying with adhesive and spreading with puddy knife. 101.3 KB · Views: 365
  • Name: DSCF2400.jpg Views: 394 Size: 137.4 KB Description: When dry apply second layer of weave in a cross pattern. This will completely stiffen the wing and make the plane Bullet Proof. Repeat Spray adhesive proccess same as before. When dry apply second layer of weave in a cross pattern. This will completely stiffen the wing and make the plane Bullet Proof. Repeat Spray adhesive proccess same as before. 137.4 KB · Views: 394
  • Name: DSCF2401.jpg Views: 466 Size: 59.1 KB Description: Bevel all edges of upper fuselage with hotwire cutter , handheld hotwire cutter, or razor knife.Then round edges with sanding blocks. Bevel all edges of upper fuselage with hotwire cutter , handheld hotwire cutter, or razor knife.Then round edges with sanding blocks. 59.1 KB · Views: 466
  • Name: DSCF2402.jpg Views: 381 Size: 90.8 KB Description: Bevel sand and shape the lower fuselage piece the same way the upper piece was done. Bevel sand and shape the lower fuselage piece the same way the upper piece was done.90.8 KB · Views: 381
  • Name: DSCF2407.jpg Views: 412 Size: 62.5 KB Description: Glue upper and lower fuselage pieces to center fuselage-wing piece using either 3m 90 spray adhesive, hot glue, or 5 minute epoxy. Do on flat surface and place weighted board on top to make sure everything dries flat. Glue upper and lower fuselage pieces to center fuselage-wing piece using either 3m 90 spray adhesive, hot glue, or 5 minute epoxy. Do on flat surface and place weighted board on top to make sure everything dries flat. 62.5 KB · Views: 412
  • Name: DSCF2414.jpg Views: 462 Size: 62.1 KB Description: Test fit motor for correct alignment. Should be level and centered on wing and parallel with fuselage center line. Test fit motor for correct alignment. Should be level and centered on wing and parallel with fuselage center line. 62.1 KB · Views: 462
  • Name: DSCF2415.jpg Views: 364 Size: 61.0 KB Description: Tape all wing edges with strapping tape to strengthen where fiberglass weave does not cover. 3M scotch cross weaved strapping tape is preferred. Much lighter and stronger. Tape all wing edges with strapping tape to strengthen where fiberglass weave does not cover. 3M scotch cross weaved strapping tape is preferred. Much lighter and stronger. 61.0 KB · Views: 364
  • Name: DSCF2419.jpg Views: 399 Size: 54.7 KB Description: Cut two 12 3/4" X 3" pieces of 1/8" thick balsa wood for elevons. Can be cut with razor knife as well. Cut two 12 3/4" X 3" pieces of 1/8" thick balsa wood for elevons. Can be cut with razor knife as well. 54.7 KB · Views: 399
  • Name: DSCF2421.jpg Views: 354 Size: 61.8 KB Description: Cut out elevon pieces using template and razor knife. Use a strait edge ruler as a guide to get nice strait cuts. Cut out elevon pieces using template and razor knife. Use a strait edge ruler as a guide to get nice strait cuts. 61.8 KB · Views: 354
  • Name: DSCF2424.jpg Views: 387 Size: 68.0 KB Description: Lightly sand all edges smooth after cutting out elevons. Lightly sand all edges smooth after cutting out elevons. 68.0 KB · Views: 387
  • Name: DSCF2431.jpg Views: 414 Size: 87.6 KB Description: Bevel the hinge side of both elevons before hinging to wing. Bevel the hinge side of both elevons before hinging to wing. 87.6 KB · Views: 414
  • Name: DSCF2440.jpg Views: 454 Size: 80.8 KB Description: Use the over and under tape method to hinge elevons to wing. This provides the best possible slop free hinge. Use the over and under tape method to hinge elevons to wing. This provides the best possible slop free hinge. 80.8 KB · Views: 454
  • Name: DSCF2444.jpg Views: 435 Size: 74.5 KB Description: Both elevons completely hinged to wing. Hand test, movement should be bind free with no slop. Both elevons completely hinged to wing. Hand test, movement should be bind free with no slop. 74.5 KB · Views: 435
  • Name: DSCF2450.jpg Views: 432 Size: 98.8 KB Description: Mark servo slots per template. It's best to lay the servos on the wing and draw around them with a pen. They should be against fuselage and parallel to centerline per template placement. Mark servo slots per template. It's best to lay the servos on the wing and draw around them with a pen. They should be against fuselage and parallel to centerline per template placement. 98.8 KB · Views: 432
  • Name: DSCF2452.jpg Views: 385 Size: 151.8 KB Description: Use razor knife to cut through fiberglass weave then remove cut out weave piece. Use hot knife to cut slot for servos. Do not go all the way through to bottom. Slot should be just deep enough for servos to be flush with the top of wing. Use razor knife to cut through fiberglass weave then remove cut out weave piece. Use hot knife to cut slot for servos. Do not go all the way through to bottom. Slot should be just deep enough for servos to be flush with the top of wing. 151.8 KB · Views: 385
  • Name: DSCF2461.jpg Views: 454 Size: 125.7 KB Description: Test fit servos, control rods and control horns. Control rods should be parallel to centerline. Both control horns should measure the same distance back from hinge line. Servo arms should be centered with radio on. Test fit servos, control rods and control horns. Control rods should be parallel to centerline. Both control horns should measure the same distance back from hinge line. Servo arms should be centered with radio on. 125.7 KB · Views: 454
  • Name: DSCF2462.jpg Views: 484 Size: 86.6 KB Description: With radio on and control rods and control horns attached make sure servo arms are centered. After everything is correct hot glue servos in place. They should be flush with top of wing. With radio on and control rods and control horns attached make sure servo arms are centered. After everything is correct hot glue servos in place. They should be flush with top of wing. 86.6 KB · Views: 484
  • Name: DSCF2464.jpg Views: 473 Size: 96.3 KB Description: Tape top of servos with cross weaved straping tape. Cut receiver slot in top fuselage piece per template. Can use hot knife or razor knife. Tape top of servos with cross weaved straping tape. Cut receiver slot in top fuselage piece per template. Can use hot knife or razor knife. 96.3 KB · Views: 473
  • Name: DSCF2466.jpg Views: 413 Size: 69.7 KB Description: Fit balsawood hatch cover to top fuselage piece. Hinge front of hatch cover with cross weave straping tape. Fit balsawood hatch cover to top fuselage piece. Hinge front of hatch cover with cross weave straping tape. 69.7 KB · Views: 413
  • Name: DSCF2469.jpg Views: 524 Size: 81.0 KB Description: Cut battery slot through top fuselage piece and center fuselage-wing piece. Use hot knife or razor knife. Cut battery slot through top fuselage piece and center fuselage-wing piece. Use hot knife or razor knife. 81.0 KB · Views: 524
  • Name: DSCF2476.jpg Views: 421 Size: 74.4 KB Description: Trial fit battery into slot. Battery should fit snuggly. Slot is over sized to allow adjustment of the planes CG. Trial fit battery into slot. Battery should fit snuggly. Slot is over sized to allow adjustment of the planes CG. 74.4 KB · Views: 421
  • Name: DSCF2479.jpg Views: 486 Size: 140.3 KB Description: Cut slots for ESC and wiring to motor into top fuselage piece. Cut just deep enough so everything fits flush at the top. Cut slots for ESC and wiring to motor into top fuselage piece. Cut just deep enough so everything fits flush at the top. 140.3 KB · Views: 486
  • Name: DSCF2480.jpg Views: 487 Size: 73.4 KB Description: Apply cross weave strapping tape along seam where top and bottom fuselage meet  the center fuselage-wing. Bottom fuselage should be completely covered to protect when landing. Apply cross weave strapping tape along seam where top and bottom fuselage meet the center fuselage-wing. Bottom fuselage should be completely covered to protect when landing. 73.4 KB · Views: 487
  • Name: DSCF2485.jpg Views: 559 Size: 73.9 KB Description: Apply cross weave strapping tape to nose section of plane. Then cut plastic canopy to fit and attach with cross weave strapping tape. Glue rear stabilizers in place per template. Apply cross weave strapping tape to nose section of plane. Then cut plastic canopy to fit and attach with cross weave strapping tape. Glue rear stabilizers in place per template. 73.9 KB · Views: 559
  • Name: DSCF2486.jpg Views: 490 Size: 58.0 KB Description: Cover plane with desired color sealing tape, Trim Monokote or Monokote. Cover plane with desired color sealing tape, Trim Monokote or Monokote. 58.0 KB · Views: 490
  • Name: DSCF2495.jpg Views: 427 Size: 57.1 KB Description: Because of the speeds this plane is capable of it is not recommended to use just one color. Color variation will help tell the orientation of the plane in flight Because of the speeds this plane is capable of it is not recommended to use just one color. Color variation will help tell the orientation of the plane in flight 57.1 KB · Views: 427
  • Name: DSCF2500.jpg Views: 431 Size: 50.1 KB Description: I usually make one sided of the plane dark color and the other side very bright. The bottom of the plane is black with black and white checker board invasion stripes. I usually make one sided of the plane dark color and the other side very bright. The bottom of the plane is black with black and white checker board invasion stripes. 50.1 KB · Views: 431
  • Name: DSCF2505.jpg Views: 417 Size: 56.5 KB Description: The top of the plane is covered in day glow orange with black trim. The rear stabilizers are black and white to give more variation in color. The top of the plane is covered in day glow orange with black trim. The rear stabilizers are black and white to give more variation in color. 56.5 KB · Views: 417
  • Name: DSCF2507.jpg Views: 694 Size: 64.0 KB Description: Finished plane on balancer. CG is 14 3/8" from the tip of the nose back. Finished plane on balancer. CG is 14 3/8" from the tip of the nose back. 64.0 KB · Views: 694
  • Name: DSCF2511.jpg Views: 479 Size: 57.1 KB Description: Finished plane top view Finished plane top view 57.1 KB · Views: 479
  • Name: DSCF2516.jpg Views: 544 Size: 58.0 KB Description: Finished plane three quarter view. Finished plane three quarter view. 58.0 KB · Views: 544

Keo dán 3M Pr100

3M™ Scotch-Weld™ Plastic & Rubber Instant Adhesive PR100 - là keo loãng, dễ sử dụng chuyên dùng dán nhựa và cao su, đặc biệt dùng cho các bề mặt khó dán, như là EPDM, Viton®) và nylon.
Công dụng  và tính năng:
·         Dán được nhựa và cao su
·         Loãng, dễ phủ bề mặt, dẻo khi kết dính 
·         Sử dụng trong công nghiệp sản xuất, bảo dưỡng,  dán kim loại, đồ thể thao (giày, dép,..), dụng cụ thể thao và gia đình, các vật liệu composite, dán các mối nối chịu được tải trọng cao (kết hợp với băng dính cho mối nối của 3M).
·         Có nhiều kích cỡ bao bì khác nhau với thể tích lớn để sử dụng trong công nghiệp..
Bạn có một đôi giày giá trị cao, đôi giày bị hở keo, bạn không biết dùng loại keo nào để dán.
Không thể dùng keo 502 được, sẽ làm hư giày.

Keo dán giày cao cấp PR100 do công ty 3M sản xuất.
Dùng để dán giày, dán cao su, và nhựa.

3M™ SCOTCH-WELD™ PLASTIC & RUBBER INSTANT ADHESIVE PR100

3M™ Scotch-Weld™ Plastic & Rubber Instant Adhesive PR100 is a low viscosity instant adhesive for Plastic and rubber.
3M™ Scotch-Weld™ Plastics & Rubber Instant Adhesive PR100 is formulated to give exceptional performance on difficult to bond substrates, such as EPDM and nylon.
1. Khô chậm hơn keo của Nhật 1 chút:
Thuận lợi: Tiết kiệm keo, em đã test thử, chiết 1 giọt keo 3M và để ngoài không khí 10 phút keo vẫn chưa đông, do đó rất đỡ hao khi dùng ít.
Khi dán thì dùng tăm hoặc kim, chấm 1 ít lên miếng P.E rồi dán, keo khô ngay.

2. Độ kết dính theo đánh giá là tốt ngang với mấy loại keo của Mr. hobby, Mr. Just của Nhật. Em đang có rất nhiều loại keo dán P.E khác nhau, các bác thích có thể đến nhà em để dùng thử.

3. Hóa trắng: Ở 1 số loại keo, sau khi dán xong, keo đông lại sẽ chuyển sang màu trắng, ảnh hưởng tới tính thẩm mỹ của mô hình và chi tiết dán. Keo 3M ít bị hóa trắng, đó là ưu điểm nổi bật của keo này, thậm chí còn tốt hơn 1 số loại keo của Nhật.

4. Lợi keo: 1 hộp này tới 20g, em mua 1 hộp dán hơn 3 tháng trời mới hết 1/2 , nên AE nào chơi mô hình thì cứ đầu tư 1 lần rồi dùng hoài nhé.
Bonus cho AE vài tấm hình


Hàng Made in England nhé các bác 


Đây là đạn dược của em, AE nào muốn thử thì cứ tới nhà em chơi giao lưu 


yamato dùng keo này để dán mấy mô hình tàu chiến 1/700, đẹp ko tì vết đây các bác 


(mượn một số hình ảnh của bạn yamato - thanks nha)
Tham khảo 1 số site ở nước ngoài để tham khảo giá và chất lượng
1. http://www.3mselect.co.uk/p-2459-3m-...pr100-20g.aspx
2. http://www.apdmro.com/Scotch-Weld-Ri...100-s/2900.htm


Unordered List

Sample Text

Blog Archive

www.vatlieucongnghiep.com. Được tạo bởi Blogger.

Popular Posts

Recent Posts

Text Widget